Why Prime? Starting Right 101
Updated: Nov 5, 2023

Priming your work surface is one of the most important steps you can take in having a great outcome on your Barn Quilt project, especially if you risk using a plywood as your surface. I never recommend this and I am going to go and take pictures of plywood BQ's and do a visual on how these hold up. Another blog later about this.
Prime, or not to prime is the question. You should know what to use, how much to use and what it does.
The most important function of priming is to prepare the surface for the most favorable results of vibrant colors with suitable saturation. The primer is beneficial to the paint in several ways. (https://interiordesign.lovetoknow.com/interior-design-basics/why-should-you-prime-before-painting)
It bolsters the paint's durability and protective properties.
Primer further assists the paint in coverage.
Some primers can be tinted to match the paint color.
A primer will reduce the number of paint coats needed.
It acts as a sealer against water.
Primers are great over dark paint when a lighter paint is used.
Surfaces that won't come clean can be primed to seal the surface in preparation for the paint.
Not all surfaces are equal, but primers make all surfaces consistent for receiving paint.
Primers are necessary for new walls before hanging wallpapers.
Some paints will peel off walls that aren't primed.
I see some people who apply multiple coats of primer. This is not necessary. Primer is formulated to "do it's thing" in a single coat. There is no advantage of applying more than one coat of primer. So why waist time and money by applying more that one coat? It is not necessary, one coat does the job.
I always use a light grey coat of paint where I plan to paint reds/dark pinks/deep purples. This just helps to reduce the number of coats of paint needed to get the color richness that I desire. You can tint a primer but if you are painting lighter colors such as yellow, it will require more coats. This is why I choose to use a white primer and just a coat of light grey where needed.
I have seen where some artists do not prime AC before painting. I tired a sample both ways and I feel primer is necessary and I prefer the texture of the primer verses the slick shiny surface of the AC. I guess that is a personal decision for the artist but the AC manufacture does state that priming is not a necessary step. If I used One Shot paint, I would not prime the AC.

Kilz is my go to choice and a water based product. I have used the Zinger brand also. I apply mine with a 6" roller and allow it to dry to touch before I proceed with drawing and painting my BQ.
In closing, my opinion and experience is to prime but only one coat, use a grey to save time and use your best judgement on to prime or not on AC is your choice.
Carry On The Addiction,
Talara





So you use a roller to apply the primer?
What kind of boards do you use? What is the problem with plywood?
I’m so afraid of water damage on the EDGES… I roll 3 coats… so it’s probably overkill. I will try the KILZ !!